Alloy & Cast Wheels
Factory and aftermarket alloys stripped of peeling clear and refinished in the color you actually wanted.
Curb rash, peeling clear and faded factory silver, taken back to bare alloy and finished in whatever color the build actually calls for. Wheel and rim coating for Ithaca and all of Mid-Michigan.
Wheel & Rim Coating
Nothing changes the look of a vehicle faster than the wheels, and nothing on a vehicle gets treated worse. Brake dust, road salt, stone chips, curbs, tire machines and pressure washers all attack the same four parts — which is why factory clear coat peels and painted wheels start looking tired within a few seasons.
Powder coating is simply a better answer for wheels. The cured film is thicker and harder than wheel paint, it flexes rather than cracking, it shrugs off brake dust and salt, and it's far easier to keep clean. We strip each wheel back to bare metal first, so you're not building a new finish on top of a failing one.
Full sets, single replacement wheels, steelies, alloys, truck wheels, motorcycle rims and trailer wheels all come through the shop. Bring them bare if you can — if you can't, tell us and we'll sort out the details when you drop off.
Ithaca is about 17 miles east of the shop, roughly 25 minutes door to door. Ithaca is the Gratiot County seat, a farming community sitting right on US-127 in the middle of some of the best agricultural ground in the state — which means a steady supply of equipment that's earned a fresh finish. We get a steady stream of full wheel sets, truck wheels and motorcycle rims from Ithaca and the surrounding Gratiot County towns, and most of those customers make the drive because there isn't another shop nearby running blasting, prep, coating and curing under one roof. Call ahead on 989-289-2298 and we'll have a quote ready before you load up.
Curing happens in an oven, so tires, valve stems, TPMS sensors, weights and center caps all have to come off first. Most tire shops will dismount and remount for a small charge — get that lined up before you drop off and the whole job moves faster.
Four wheels, one wheel, or a stack of them in the truck bed.
Factory and aftermarket alloys stripped of peeling clear and refinished in the color you actually wanted.
Steelies blasted free of rust and coated — gloss black, white or body color for the classic look.
Heavy wheels that see gravel, mud and salt, finished in coatings built for that instead of for a showroom.
Rims, hubs and spoke sets coated to match the frame or contrast against it.
Rash and scuffs cleaned up during prep so the new coating isn't laid over damage.
Machined-face looks, contrasting lips and coated centers using masked multi-stage work.
Utility and trailer wheels coated to stop the rust cycle that starts the first winter they're out.
Brake calipers, lug covers, center caps and hardware coated to match or contrast the wheels.
Every wheel gets the same treatment, whether it's a show set or a winter set.
Wheels come to us bare — no tires, weights, valve stems or sensors. Anything that can't take oven heat has to be out first.
Peeling clear, old paint and previous powder are removed completely. Coating over failing clear coat just buys you a season.
The wheel is blasted to clean metal with an even profile — including the barrel, the back face and between the spokes.
Brake dust and road film get washed off, then hub bores, stud holes and valve stem holes are plugged so nothing needs cleaning up later.
Color goes on evenly across faces, spokes, lips and barrels, then the wheel bakes until the powder cures into a hard shell.
Coverage and edges get checked on every wheel before the set goes back to you for mounting and balancing.
Road salt destroys wheel finishes. A cured powder coat resists salt, brake dust and chemical wheel cleaners far better than factory clear or wheel paint.
Wheels take constant stone strikes. Powder's thicker, more flexible film absorbs those hits instead of chipping and letting corrosion start underneath.
Refinishing a tired set of alloys usually costs a fraction of buying new wheels — and you keep the fitment and offset you already know works.
All four wheels get coated together with the same powder, so the set matches exactly. That's harder to guarantee with paint touched up over time.
Ithaca is a fraction of the drive to Grand Rapids or Lansing, and you're dealing with the same veteran-owned, family-run shop from quote to pickup. Blasting through curing all happens in one building — your parts never leave Gratiot County's back yard mid-job.
Recent work out of the Carson City shop — see more on Facebook.
I had four wheels powder coated — excellent work, fast turnaround. Very friendly people to work with. Great price!
I've had these guys do a ton of work for me lately and they hands down have the best customer service and quality out of any powder coating company I've ever used. They are my new go to for any powder coating needs! They truly care about their work!
Straight answers to what customers ask us most. Anything not covered here, just call the shop.
Yes. Our shop is at 7883 South St. in Carson City, about 17 miles east of Ithaca — roughly 25 minutes door to door. Customers from Ithaca and across Gratiot County bring us full wheel sets, truck wheels and motorcycle rims regularly. Call or text 989-289-2298 and we'll quote the job before you make the drive.
About 17 miles east, which is about 25 minutes of driving depending on where in Ithaca you start. We're open every day from 6:00 AM to 8:00 PM, so a drop-off is easy to fit around work.
It depends on wheel size, how much stripping is needed, and whether you want a standard color or a multi-stage candy. Call or text 989-289-2298 with the wheel size and a photo and we'll give you a price for the set — quotes are free.
Yes. Powder cures in an oven at temperatures rubber can't survive, so tires, valve stems, TPMS sensors and wheel weights all have to be removed before we can coat. Most tire shops will dismount and remount for you at a reasonable price.
A standard set generally turns around in days rather than weeks — one of our customers described it as excellent work with a fast turnaround. Multi-stage candy or two-tone finishes take longer because each layer cures separately. Call for current lead times.
We clean up rash and scuffing during prep so the new finish isn't laid over damage. Deep gouges and bent or cracked rims are a structural repair question, not a coating one — bring them in and we'll tell you honestly what we can and can't improve.
Gloss and satin black are still the most requested by a wide margin, followed by bronze, gunmetal and satin grey. Candy colors over a bright base draw the most attention when someone wants the set to be the focal point of the build.
That's exactly what it's good at. A cured powder film handles salt, brake dust and wheel cleaner chemicals better than factory clear coat, and it's easier to wash. Rinsing the salt off through winter still helps any finish last longer.
We're at 7883 South St. in Carson City, about 17 miles east of Ithaca — about 25 minutes, and an easy run from anywhere in Gratiot County.
Same shop, same standard — pick the town closest to you.
One shop, the whole cycle — so nothing gets handed off halfway through.
Tell us what you're bringing in and we'll get you a quote — no runaround.
Drop us the details on your project and we'll get right back to you. Prefer to talk it through? Give the shop a call.
