Rusted Frames & Structural Steel
Trailer frames, subframes, beams and weldments taken back to sound metal so you can see what you're actually working with.
Rust, flaking paint, mill scale and forty years of neglect, blasted off and taken back to clean, profiled steel. The starting point for a coating that actually sticks — or a finished job on its own. Serving Ithaca and Mid-Michigan.
Sandblasting
Sandblasting drives abrasive at a surface under high pressure to shear off everything that isn't the base metal — rust, scale, old paint, cured powder coat, undercoating and corrosion pitting. What's left behind isn't just clean, it's profiled: a fine texture across the whole surface that gives the next coating something mechanical to key into.
That second part is the reason blasting matters more than most people expect. You can chemically strip a part and it'll look clean, but a glass-smooth surface gives a coating almost nothing to hold onto. A properly blasted profile is the difference between a finish that lasts a decade and one that lifts at the first stone chip.
We run blasting out of our Carson City shop as a standalone service — plenty of customers just want parts back in bare metal to weld, machine or paint themselves — and as step one of every powder coating job that leaves here.
Ithaca is about 17 miles east of the shop, roughly 25 minutes door to door. Ithaca is the Gratiot County seat, a farming community sitting right on US-127 in the middle of some of the best agricultural ground in the state — which means a steady supply of equipment that's earned a fresh finish. We get a steady stream of rusted frames, cast iron, trailer parts and farm equipment from Ithaca and the surrounding Gratiot County towns, and most of those customers make the drive because there isn't another shop nearby running blasting, prep, coating and curing under one roof. Call ahead on 989-289-2298 and we'll have a quote ready before you load up.
Bare steel starts oxidizing again within hours, especially in humid weather. If we're coating it too, it goes straight from the cabinet into prep. If you're taking parts home raw, plan to prime or coat them quickly — and keep them dry and off bare fingers.
Heavy rust, stubborn coatings and parts nobody else wants to deal with.
Trailer frames, subframes, beams and weldments taken back to sound metal so you can see what you're actually working with.
Brackets, control arms, axle housings, bumpers, pans and hardware stripped of undercoating, paint and surface rust.
Radiators, wood stoves, bench ends, cookware and antique castings brought back to raw iron without hammering the detail flat.
Decks, ramps, tongues and railings stripped so a new coating goes on over metal instead of over failing paint.
Implements, plow blades, hitches, buckets and machinery parts blasted clean of rust and caked-on residue.
Steel and alloy wheels stripped of peeling clear, curb rash filler and old paint before recoating.
Ornamental iron and handrails taken back to metal instead of getting one more coat of paint over the rust.
Mill scale, slag and heat discoloration cleaned off fabricated pieces before finishing or further work.
Controlled, checked, and matched to what the part can take.
We look at the metal thickness, the alloy and how bad the corrosion is, then pick a media and pressure that will strip it without damaging it.
Machined faces, threads, bearing bores and anything that shouldn't get cut by abrasive is plugged and covered first.
Abrasive is worked across the whole surface until every trace of coating, rust and scale is gone and the profile is even.
Spent media and dust are blown out of every pocket, seam and cavity, then the part gets checked over under good light.
If we're coating it, the part moves directly to degreasing and masking before flash rust has a chance to start.
Pitting, weld seams, inside corners, textured castings and box sections — abrasive gets into all of it evenly. A wire wheel polishes the high spots and leaves the rust in the low ones.
Filler, hidden rot and old repairs show up the moment the paint comes off. Better to learn that before you've invested in a finish.
Blasting leaves a controlled anchor pattern. That mechanical grip is what stops a coating from lifting later — it's not something a chemical strip can replicate.
Blasting throws dust everywhere and eats consumables fast. We're set up for it, contained, and we clean up after — you just pick up finished parts.
Ithaca is a fraction of the drive to Grand Rapids or Lansing, and you're dealing with the same veteran-owned, family-run shop from quote to pickup. Blasting through curing all happens in one building — your parts never leave Gratiot County's back yard mid-job.
Recent work out of the Carson City shop — see more on Facebook.
Sandblasted a cast iron radiator for me. Did a great job. Looks fantastic, and a fair price. Highly recommend.
I've had these guys do a ton of work for me lately and they hands down have the best customer service and quality out of any powder coating company I've ever used. They are my new go to for any powder coating needs! They truly care about their work!
Straight answers to what customers ask us most. Anything not covered here, just call the shop.
Yes. Our shop is at 7883 South St. in Carson City, about 17 miles east of Ithaca — roughly 25 minutes door to door. Customers from Ithaca and across Gratiot County bring us rusted frames, cast iron, trailer parts and farm equipment regularly. Call or text 989-289-2298 and we'll quote the job before you make the drive.
About 17 miles east, which is about 25 minutes of driving depending on where in Ithaca you start. We're open every day from 6:00 AM to 8:00 PM, so a drop-off is easy to fit around work.
It depends on the size of the piece, how much surface area there is, and how heavy the rust or coating is. A cast iron bench end is a different job than a trailer frame. Call or text 989-289-2298 with photos and we'll quote it — free, and we'll tell you honestly if blasting isn't the right call.
It can, if it's done carelessly. Thin sheet metal, aluminum and delicate castings need lower pressure and a gentler media, which is exactly what our media blasting service is for. We match the abrasive to the part rather than running everything at full pressure.
No — a lot of customers take parts home bare to weld, machine or paint themselves. Just be aware that bare steel starts flash rusting within hours, so have your primer or coating ready to go the same day.
Yes, that's one of the main reasons to blast rather than sand. Abrasive reaches down into pitted areas and pulls the corrosion out of the bottom of the pits instead of just knocking the tops off. Deeply pitted metal will still look pitted — but it'll be clean pitting, not active rust.
Anything that can't take abrasive impact or the dust: chrome you want to keep, glass, plated surfaces, bearings, seals, and parts with sealed cavities that will trap media. Bring parts disassembled and bare where you can. If you're unsure, ask first.
We work out of the shop at 7883 South St. in Carson City so we can contain the media and control the results. If you've got something large or awkward, call 989-289-2298 and we'll talk through the best way to handle it.
We're at 7883 South St. in Carson City, about 17 miles east of Ithaca — about 25 minutes, and an easy run from anywhere in Gratiot County.
Same shop, same standard — pick the town closest to you.
One shop, the whole cycle — so nothing gets handed off halfway through.
Tell us what you're bringing in and we'll get you a quote — no runaround.
Drop us the details on your project and we'll get right back to you. Prefer to talk it through? Give the shop a call.
